Excavator 360° N202 above and below 10t

Service Description

Please not this is at client location includes theory test ACTIVITY GUIDELINES The learner must :- Test sequence ✅Complete all pre-start and running checks before any activity takes place ✅Only complete the shutdown procedures at the end of the test ✅All additional test requirements can be completed in any order Operator safety & observations ✅Seat belt must be worn if stated in the employers risk assessment / method statement ✅The excavator must be serviceable, meets the current legislation and fitted with a standard excavating bucket The learner must:- Travelling to work area ✅Travel up and down a gradient ✅Travel through a restriction in a forward and reverse direction ✅Travel over varying terrain Prepare and set up the machine for excavating duties Setting up to excavate ✅ Excavate a trench with vertical ends Excavate trench and load vehicle ✅Form a load out bench appropriate for loading vehicles (see additional notes below) ✅Load material on to vehicle Backfill excavation ✅Backfill and reinstate excavated area to original state Change attachment ✅Remove and attach bucket / attachment Shutdown procedures ✅Excavator parked in a safe position with the engine and isolator key removed and handed to the instructor Additional notes ✅A verbal description to the instructor of the pre-start checks would be acceptable if the machine is hot ✅The operator’s manual must be accessible ✅ When the bucket is released from the quick hitch system, the boom must be raised and slewed away from the released bucket, the excavator must be moved and reposition before re-attaching ✅The slope must be of sufficient incline to enable the candidate to demonstrate the correct procedures for traveling up and down a gradient as per manufacturers recommendations ✅The task of forming a load out bench appropriate for loading vehicles can be substituted by loading a vehicle when carrying out the trench excavation Specifications Trench length will be determined by the machine weight as listed: ✅Below 10 tonnes – 10 meters ✅Above 10 tonnes – 15 - 20 meters ✅Trench depth must be a minimum of 1 meter ✅The loading vehicle must be filled to the capacity (minimum 2 loads) Test timings ✅The full test must be completed within 2hrs 15min Note It is recommended that all learners completing basic training receive a minimum 7hr Health, Safety, Environment and Induction Training

Cancellation Policy

Cancellation policy: If you need to reschedule your booking within less than seven days' notice, please contact us by phone or email. If we haven't yet ordered any plant for your booking, there will be no additional charge beyond the deposit. However, if we have already ordered plant or arranged for transportation, you may be responsible for those costs you will

Contact Details

• Northlands, Thorpe Lane Wakefield England WF3 1SL United Kingdom

  07540652477

  chris@ctassessments.co.uk