NPORS Road Roller

Service Description

ACTIVITY GUIDELINES The learner must : All pre-start and running checks must be completed before any activity takes place The shutdown procedures must only be completed by the learner at the end of the test All additional test requirements can be completed over the period of the test duration Seat belt must be worn if stated in the employer's risk assessment/method statement The roller must be serviceable and meet the current legislation : Prepare and set up the machine for compacting duties specifying the exclusion zone The rolling area must consist of a supported area (kerbs etc.) and an unsupported area (free running) : Compact a straight run with suppering and un-supporting edges applying at least 3 Compact a radius with a supporting edge by applying at least three passes passes • Cones or other obstructions must be placed in the compacting area to simulate ironwork . The roller must be parked in a safe position with the engine and isolator key removed and handed to the instructor • A verbal description to the instructor of the pre-start checks would be acceptable if the machine is hot • The operator's manual must be accessible • The ride-on roller must be fitted with R.O.P.S. • A rolling pass comprises a compacting in one direction using the dead rolling method and returning on the same path using the vibratory system • An overlap will comprise of no more than one-quarter of the width of the compacting drum • Compaction must take place as close to the supported area as practicable depending on the material used • The straight run to be compacted must be no less than 15m in length with a sufficient hard standing at one end • The width of the area must be no less than 4 x the width of the drum of the roller to be used The radius must have a curve of 5-10m The material used must clearly show areas that have been compacted, overlapped and any direction change • A chicane to be negotiated both forwards and reverse, the minimum distance at the extremities to be 500mm The full test must be completed within 1 hour It is recommended that all learners completing basic training receive a minimum 7hr Health, Safety, Environment and Induction Training Price dont include card fees and VAT this is calculated after , make sure you have selected the card fees

Cancellation Policy

Cancellation policy: If you need to reschedule your booking within less than seven days' notice, please contact us by phone or email. If we haven't yet ordered any plant for your booking, there will be no additional charge beyond the deposit. However, if we have already ordered plant or arranged for transportation, you may be responsible for those costs you will

Contact Details

• CT Assessments & Training Ltd, Thorpe Lane, Leeds, Wakefield, UK

  07540652477

  chris@ctassessments.co.uk

• Northlands, Thorpe Lane Wakefield England WF3 1SL United Kingdom

  07540652477

  chris@ctassessments.co.uk