On the machine from day one
What our telehandler training covers
A telehandler looks simple until you’ve got a pallet of blocks at full extension and the load chart is telling you something you didn’t expect. That’s the part we spend time on. You’ll learn pre-use checks, reading load charts, placing loads at height onto scaffold, travelling safely on rough ground, and changing attachments properly.
Novices get plenty of seat time on our training ground near Leeds before going anywhere near a test. Experienced operators who’ve been driving for years without a card can go straight to a test-only route instead.
Choose your course
Telehandler
Courses
Three routes, depending on what you’re lifting and who’s paying. Not sure which one fits? Ring us and we’ll tell you straight.
NPORS Telehandler (N010)
CITB-Funded Telescopic Handler
Suspended Loads (N138)
Over 30 Years' Experience
Instructors and office staff who've been in the industry a long time.
Rated 5 Stars
67+ Google reviews from candidates and employers.
Tailored to You
We work at your pace, whatever your starting point.
Centre or On-Site
On-site training anywhere in the UK, or at our Wakefield centre.
Telehandler Training Leeds
Telehandler Training Leeds Teams Can Book On-Site
If you’ve got several operators who need carding, it’s usually cheaper and easier for us to come to you. We’ll train on your telehandlers, on your ground, around your programme, which means the skills transfer straight back to the job on Monday morning.
We cover sites across Leeds, Wakefield, Bradford, Harrogate and the rest of Yorkshire, and further afield when needed. Every candidate finishes with the right card for the machine. For CSCS-logo cards, that includes help with the health, safety and environment test and the NVQ route to a blue Competent Operator card.
Good to know
Telehandler course FAQs
How long is a telehandler course for a novice in Leeds?
A novice telehandler course usually runs over three to five days, depending on the machine and how much plant experience you already have. Experienced operators who just need testing can often be done in a day. We’ll ask a few questions first so you’re not paying for days you don’t need.
What is the difference between a telehandler licence and a forklift licence?
They’re different machines and different tickets. A telehandler has a telescopic boom and is built for rough ground and lifting to height on construction sites; a forklift has a fixed mast and works on flat floors. A forklift card won’t cover you on a telehandler, and most sites will check.
Do I need a CPCS or NPORS card for telehandler work in Leeds?
Both are accepted on the majority of sites. Some larger main contractors and infrastructure projects specify CPCS, so check with your employer before booking. NPORS cards with the CSCS logo are accepted on most Build UK sites. Our NPORS vs CPCS guide explains the difference, and if you’re already on a red card, here’s how to get a CPCS blue card.
Can a telehandler be used to lift suspended loads?
Only if the machine is set up for it and you’re trained for it. Lifting suspended loads with a jib or hook attachment turns the telehandler into a crane, and that needs its own category, such as NPORS N138. If you’ll be lifting anything on chains or slings, mention it when you enquire.
Is CITB funding available for telehandler training?
If your employer is registered with CITB, they may be able to claim grant funding towards a telehandler course and test. We run CITB-funded telescopic handler courses, so ask us when you enquire and we’ll talk you through what’s needed.
Course finder
Not Sure Which Course Is Right For You?
Answer a few short questions about your experience and where you'll be working, and we'll show you the right route.
★★★★★ Rated
Customer Reviews
Don't take our word for it. Here's what candidates and employers have said after training with us.